Freight rail cars
15-1210-03
Steam heating jacket used in the design enables transportation of high viscosity petroleum products.
With steam heating jacket
15-1219
The lightweight construction of the platform provides a significant reduction in the tare weight of the tank, increasing the load capacity by 3 tons and usable volume by 12.5 m3 versus competing counterparts.
Increased load capacity: 69 t
15-1218
Use of innovative 25 tf axle load bogie allows to extend the list of transported cargoes including petroleum products of 1 t/m3 bulk density.
Increased load capacity: 72.7 t
15-9892
Distinctive feature of this design is the use of two barrels connected via SSD zero backlash drawbar coupler manufactured by Wabtec (USA).
Zero backlash drawbar coupler
15-1210-А
Transported cargoes: viscous petroleum products of 1,13 t/m3 bulk density.
Service life: 32 years
15-1233
The barrel is made of stainless steel.
Universal drain device with two layers of protection
15-1210-1P
Suitable for transportation of high viscosity and solidifying plant oils
With steam heating jacket
15-1288-02
The barrel is made of high strength steel.
The barrel is made of high strength steel
15-1264
Service life: 32 years.
The greatest barrel and load capacity among counterparts with 23.5 t axle load
15-1256
Improved thermal insulation provides for keeping cargo in warm (liquid) state for 6-10 days at an ambient temperature above -40°C.
15-1269
Improved thermal insulation provides for keeping cargo in warm (liquid) state for 6-10 days at an ambient temperature above -40°C.
Maximum load capacity among counterparts
15-1232-04
With steam heating jacket.
Optimal combination of load and barrel capacity
15-1232-03
With steam heating jacket and shady shielding screen.
15-1232-02
With steam heating jacket and shady shielding screen.
15-1232
Optimal load capacity for each type of cargo.
15-1257
Cargo heating temperature control prevents potential tank overheating thus extending its service life.
Increased load capacity: 69.5 t
15-1225
Stainless steel construction of the tank barrel increases service life from 18 to 27 years.
With steam heating jacket
15-1225-01
Stainless steel construction of the tank barrel increases service life from 18 to 27 years.
With steam heating jacket
15-1288
Design features of the tank car provide a longer warranty period for the customer.
Design Pressure: 2.16 MPa
15-1267
The internal design of the barrel includes a system of slopes, trays and pipes for compressed air supply. The central part of the barrel is equipped with an unloading unit, through which the cargo is unloaded on either side of the tank car or on both sides simultaneously.
Pneumatic unloading system
15-1226
The tank construction includes high-alloy steel which ensures a longer service life (up to 27 years) and a wider operational temperature range (from -60 to +50 degrees С).
Operation in a wide temperature range
11-1268
Increased floor area of 52.8 square meters enables accommodation of 42 Euro pallets, 34 Industrial pallets or 28 Asian pallets.
Increased load capacity: 68 t
32-1263
The pneumatic system provides unloading on either side of the railway track and return of the car body to travel position.
32-9792
The dump car design provides the required strength when loading up to 2 tons of lumpy cargoes from a height of 2 m onto a pre-poured fine fraction cargo of at least 300 mm height.
The largest capacity of transported cargo among counterparts
12-1293
Reinforced end wall and reinforced cantrail ensure additional rigidity of the body during loading and unloading operations.
Increased body rigidity
19-1273
Model is intended for bulk transportation of granular coarse crystalline non-caking corrosive mineral fertilizers and other loose powdered raw materials.
25 tf axle load bogie