Petrochemical and natural gas processing equipment

Settling tanks of 50,100 and 200 m³ volume are intended for preliminary discharge of formation water from oil.

Maximum allowable working temperature of the tank wall is 100°C

The vessels are designed for deep dehydration and demineralization of oil. Сapacity is up to 250 m³.

Maximum allowable working temperature of the tank wall is 80°C

(ВЭЭ - vertical, elliptical heads; ВКЭ - vertical, cone & flat heads; ВПП - vertical, flat&flat heads; GKK - horizontal, elliptical&elliptical heads). Pressure vessels of the types: ВЭЭ (Russian product classification code 36-1512), ВКП (Russian product classification code 36-1522, 36-1512), ВПП (Russian product classification code 36-1516, 36-1526), ГЭЭ (Russian product classification code 36-1515) .

Horizontal vessels for liquids of 4 to 250 m³ nominal volume, with 0.8; 1.0; 1.6; 2.5 MPa nominal pressures, 1200 to 3400 mm in diameter.

Depending on the application conditions, productivity ranges from 0.05 to 5.6 million m³/day.

Drums (containers) for storage and transportation of liquid chlorine, chlorofluorohydrocarbons, liquid and gaseous sulfur dioxide.

Oil and gas separators with water discharge are part of oilfield collecting and processing units.

Air accumulators are subject to inspection by Rostechnadzor (Russian Technical Supervisory Authority).

Helium receivers for storing gaseous helium in a cryogenic supply system, helium receivers for storage of gaseous helium of 76 m³ volume, oxygen receivers of 20.63 m³ volume for accumulation and storage of gaseous oxygen, nitrogen and other dry, compatible, not corrosive to metals, non-hazardous, explosion-proof gases in centralized gas supply systems of enterprises and various facilities.

Heat exchangers are designed for technological processes in the chemical, oil, petrochemical, gas and other industries (except nuclear).

Mechanically agitated vessels of АПУ type are designed for carrying out various technological processes in liquids.

Pipeline strainers for filtration of fluid media at nominal pressures of 1.6 and 4.0 MPa are intended for the protection of pumping and other equipment in process units of the oil refining, petrochemical, oil and gas industries.

The tanks are designed for drainage of light and dark oil products, crude oil, oils, condensate.

Cylindrical horizontal steel tanks of 10, 25, 50, 75 and 100 m³ volume for petroleum products storage intended for underground installation in dry and wet soils.